Neogel® 8393-W-XXXX spray gelcoat has been developed especially for the manufacture of moulds. It is recommended specifically for moulds subject to elevated temperatures in the production cycle and
when high production rates are required.
Neogel® 8393-W-XXXX spray gelcoat has been developed especially for the manufacture of moulds. It is recommended specifically for moulds subject to elevated temperatures in the production cycle and
when high production rates are required.
Characteristics | Test Method | Unit | Typical Value |
Geltime at 25℃ (2ml Butanox M50) | TM 2245 | minutes | 10-16 |
Peak temperature | TM 2245 | ℃ | 175-190 |
Viscosity at 25℃ (#4, rpm2) | TM 5042 | mPa.s | 30000-36000 |
Viscosity at 25℃ (#4, rpm20) | TM 5042 | mPa.s | 4000-5500 |
Application
Neogel® 8393-W-XXXX is pre-accelerated, ready for use. It canbe cured with standard MEKP (Butanox M50 or equivalent), without any foaming (microporosity), which is typical for many traditional vinyl ester resins. The gelcoat has excellent spray properties and can be applied with conventional spray equipment with the following recommended settings:
• Spray gun: nozzle ∅ 2.5-3.5 mm, pressure 4-5 bar.
• Airless equipment: nozzle 19/40 or 17/40 for smaller moulds, pressure 3.5–4 bar, air assist maximum (6 bars). Due to the relatively small nozzle it is recommended to use an internal filter of 100 mesh at the spray gun.
We cooperate with multiple well-known domestic suppliers
Our products have passed various industry certifications